Parker-hannifin PA Series Manual do Utilizador descarregar pdf (Página 15)

Chapter 2: Installing the PowerStation Selecting a Location

PA PowerStation User Guide 2-4

Enclosure Guidelines

Select an enclosure that is large enough to allow free airflow in and around

the unit. You should allow a minimum of 2 inches between the enclosure

and the top, bottom, and sides of the PA PowerStation to allow access to

the cabling and CompactFlash.

Also, make sure that the surface of the enclosure on which the PA

PowerStation is mounted is flat and free of raised or depressed areas.

Radiated Emissions Guidelines

This PowerStation has been tested to comply with international

electromagnetic and emission standards. To reduce radiated emissions,

ensure that there is a good earth connection to the PowerStation, which

can be accomplished by utilizing the grounding stud located on the rear

chassis of the product.This connection must be made with the shortest

possible, heavy gage wire or braided cable. Low-resistance (<0.5 ohms)

continuity should be verified with an ohmmeter for proper grounding. In

addition, all communication cables should be shielded and grounded on

only one end.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 64 65

Sem comentários

Parker-hannifin PA Series Manual do Utilizador Página 15